Going once….

I finally broke down and listed my Dickerson 8014 fly rod on Ebay. I had hoped it would have sold by now but hey that’s life. If you were ever interested in the rod or have just stumbled onto my site, you can view the rod in my post Dickerson 8014. Here is the link to the rod on Ebay. For those interested in bidding the reserve (what is a reserve on Ebay?) is set at $375. Bidding will end on January 2, 2009. Happy new year and bidding.

Dickerson 8014

The first fly rod I made took two years to complete from start to finish. Along with the fly rod I was making the tools I needed to make the finest fly rods I can. Some of the tools that I had made needed some improvement, and with those improvements made another rod was started. The out come was what I had hoped for: a higher quality rod.

The higher quality rod was in the form of a Dickerson 8014 6 wt. fly rod. There is a great taper on this rod to begin with. Lyle Dickerson is the maker who designed this rod and I have done my best to make a close reproduction. It is a fast/mid-fast taper, depending on the line you cast, making it a nice rod for those who normally fish with graphite rods.

The better quality in this rod comes in several forms. The first is the quality of the plained strips. The angles on each of the six strips were much more accurate due to improved plaining technique and improvements made to my plaining form. Secondly, the wraps were much tighter and sealed a lot cleaner than with the last rod. I also like the color combination which is green and orange.

Next comes the finish. I am vary pleased with the finish with one exception. With the last rod I had problems with the finish running after I thought it was dry. For nearly two weeks after I dipped the rod in varnish, run marks appeared in the finish. I was tipped off by another rod maker that my varnish needed thinning, which helped tremendously. The one exception I have is there are some specks and dust flecks in the finish, nothing that would turn me away from the rod, which I hope to have worked out soon.

In addition to the rod I made a tube to go with it. The tube is made out of red oak, capped on each end with red oak caps (one of which is permanently in place), and one leather strap is used to hold the top in place. The tube is made as a hexagon to mirror the rod.

I also had the rod sock embroidered with HRC. These letters represent "Heritage Rod Company," which is also the way I signed the rod this time. I chose Heritage Rod Co. because of the fishing heritage we have with this type of rod. It is a heritage that goes back to the time of my grandfather, a heritage that is worth holding on to.

If you are interested in having a handcrafted fly rod made for fishing you can contact me by email, on facebook, Twitter, Friendfeed, or Linkedin.

The rod is $600 plus shipping. The price includes the Dickerson 8014, one rod sock, and the rod tube. If you have any questions I will be glad to answer them.

Matthew

_________________________

If you would like to get updates from Grits-N-Flies subscribe to the RSS feed.

What is an RSS feed.

Dickerson 8014

My next rod I hope to construct is going to be a Dickerson 8014. From all I can gather about this rod, it is a power house. I have heard some say it will punch a 6wt line through the wind like number six Clouser punches through your ear lobe on a bad, wind stricken cast.

If any one has an intrest in a Dickerson 8014 hand crafted bamboo fly rod, please contact me through one of the contact links on the left hand side of the page.

Matthew

Rod Number One

After much toil, sweat, blood, and tears I was able to complete my first bamboo fly rod. It is

suppose to be a Phillipson Peerless 7' 6" 5wt. but it turned out a little heavier than that. May be I'll call it a mutated version of a Phillipson Peerless. No matter I still think it is the greatest casting rod on the face of the earth (this may be a little biased).!

The rod is a fast rod with most of the action being toward the tip section of the rod. I fitted the rod with a rose wood reel seat and aluminum fittings. To go with the darker flaming and the red wood reel seat I wrapped the guides with a red gossamer silk thread.

The finish on the rod is three coats of tung oil completely rubbed out and then dipped in varnish one time.

Over all the whole process was enjoyable and I am looking forward to my next rod. I wish I could give you some better photos of the rod, but my point and shoot camera doesn't do all that hot on close-ups.

I hope you like it. Let me know what you think.

Matthew

Grits-N-Flies

Southern Rod Maker Noted By The Underground

The Trout Underground has a nice piece written up on James Beasley, a rod maker here in good ole Tennessee. If you are interested in bamboo rods and those that make them it's worth a read.

Part 1
Part 2

Matthew

Back to the Drawing Board, or Should I Say Planning Form

Most things in life never go as planed. The $300 bill from the power company, the soccer mom coming out of nowhere in her van on the phone, that sudden strike while you were watching the bubbles swirl in an eddy are all things that we don't plan on, but that we should be ready for. I always look back and say to myself, I should have known that would happen.

Sadly, I just had one of those events. This one, though, is really going to hurt. I have been working on a bamboo rod for some time now, and I was excited about ordering all the parts. I had poured over rod making catalogs and web sites trying to find just the right parts. Once I had all the aesthetics taken care of I began trying to size up the parts. This is when things took the unexpected turn for the worse.

As I measured the rod nothing would even come close to the sizes they needed to be. Then it dawned on me that I had not divided my measurements in half. For those unaware, when a rod maker designs his own rod he can make the taper of the rod available in a chart form. These are available in various places on the web. The dimensions of the taper are measured from flat to flat on a hexagon shaped rod. In order to then produce the same rod I must set my planning form to half of the flat to flat measurement.

What does this all mean for me? My rod will make a very nice tomato stake next summer.

Bamboo rod attempt two is under way already. I have decided to make a 7’ 5wt. instead of a 6’ 4wt. Someone told me it would make for a better over all rod for trout fishing. So, just for fun, what size is your go to rod? What size and weight is the rod you believe you could not only take to a high mountain stream, but also to a tail water?

Matthew